FOR-A HVS-XT100, Руководство по эксплуатации, Страница: 182 / 236

182
20-3-4. Crosspoint Switches with Control Buttons (Setup)
Crosspoint switches on the control panel can be performed using USER, AUX1 to AUX4
buttons and KEY/AUX bus buttons. Before switching crosspoints, these buttons should be
set to control a router. The procedure below uses USER 1 as an example.
Assigning the Router Control ON/OFF function to USER 1
(1) Display the [SETUP - PANEL - USER BTN] (1/2) menu.
(2) Set the menu as shown below, then press F3. USER 1 allows you to enable or disable the
router control buttons (AUX1 to AUX4 and KEY/AUX bus buttons).
USER :SELECT: TYPE : FUNC(F3)
BUTTON : =
OU-1 : = OTHER : = ROUTER ENABLE

See section 14. "USER Buttons" for details on user button assignments.

Router Control Button Settings
Router control level and button settings are set as shown below as factory default settings.
Level to be controlled Level 1
AUX1-4 buttons Destination 1-4
KEY/AUX bus buttons 1-12 Source 1-12
To Change Destination and Source Button Assignments
(1) Open [SETUP - EXT I/F - ROUTER] menu PAGE 1.
(2) To assign Destination 13 to AUX 3, turn F1 to select 3, then turn F2 to select 13.
EXT I/F :DST BTN:DST CH :SRC BTN:SRC CH : 1/6
ROUTER : =
3 : = 13 : =1 : =1 :
(3) To assign Source 10 to KEY/AUX bus button 5, turn F3 to select 5, then turn F4 to
select 10.
EXT I/F :DST BTN:DST CH :SRC BTN:SRC CH : 1/6
ROUTER : =2 : =12 : =
5 : = 10 :
To Change Control Level
(1) Go to PAGE 2 in the [SETUP - EXT I/F - ROUTER] menu.
(2) Turn F1 to select a level under
LEVEL .
EXT I/F : LEVEL : DEST : SRC : : 2/6
ROUTER : =
2 : =1 : =1 : :