FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 68 / 236

68
8-8-2. Use Limitations for Pattern Transitions

When using a WIPE type pattern (0-99):
Pattern transitions cannot be simultaneously performed both on KEY1 and KEY2.
If both KEY1 and KEY2 pattern transitions are performed, one transition is automatically
changed to MIX.

When using a DVE type pattern (100-137):
Either BKGD, KEY1 or KEY2 bus can perform pattern transitions.
If the WIPE type cannot be set, a DVE pattern must be assigned to another bus. Deselect
WIPE in another bus and set WIPE again for the bus.
Note that 2D DVE menu settings are all disabled while a pattern transition is being performed
on KEY1 or KEY2.

See section 9-8. "DVE Effects on KEY/DSK."
If 2D DVE is enabled on all four key buses, KEY1, KEY2, DSK1 and DSK2, BKGD pattern
transitions cannot be performed. In such case, set 2D DVE to OFF on any bus. Then press
WIPE again for BKGD.

See section 9-8-1. "How to Enable 2D DVEs."

When using FAM (Pattern 201) or NAM (Pattern 202):
FAM or NAM transitions cannot be performed on KEY1 and KEY2. If selecting Pattern 201 or
202 for a key, transitions are performed with MIX instead FAM or NAM.