FOR-A HVS-XT100, Руководство по эксплуатации, Страница: 178 / 236

178

Deleting Clips (Mira only)
(1) Refer to "Changing CLIP ID" above to select a Clip.
(2) Turn F3 to select DELETE and then press F3.
VTR/VDCP:CLIP0001 : : 1/1
CLIP :CLIP0002 :>
DELETE :>CANCEL :
(3) Turn F3 to select OK. Then press F3 to delete the Clip. The Clip in the connected device
is also deleted. To cancel the operation, select CNCL and press F3.

Clearing Playlists
(1) Display PAGE 5 of the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Set 1 or 2 under SELECT to select Playlist 1 or 2.
(3) Turn F4 to select CLEAR, then press F4.
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=
1 :>ID SET:>TC SET: > CLEAR :
(4) Turn F3 to select OK. Then press F3 to clear the playlist data. To cancel the operation,
select CNCL and press F3.

Copying Data between two Playlists
(1) Display PAGE 5 of the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Set 1 or 2 under SELECT to select Playlist 1 or 2 for copying data.
(3) Turn F4 to select COPY, and then press F4.
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=
1 :>ID SET:>TC SET: > COPY :
(4) Turn F1 to select a copy destination (Playlist 1 or 2).
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=
2 :>ID SET:>TC SET: > PASTE :
(5) Turn F4 to select PASTE, and then press F4. The data is copied from one playlist to the
other.

Creating New Clips (Recording using VDCP)
Recording video and creating new Clips are possible. They are stored in the connected
device. To create a new clip, proceed as follows:
(1) Display PAGE 7 of the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Press F3 to change to ID input mode.
(3)To enter a new CLIP ID, set a character for each cell: Turn F3 to select the first cell, then
turn F4 to select a character for it. Repeat this process until the new ID is set. Press F3 to
apply the new ID.
EXT I/F :REC DURATION :REC ID: NEW0001 : 7/7
VTR/VDCP:=00:00:15:00 :>RENAME : >REC :