FOR-A HVS-350HS, Руководство по эксплуатации, Страница: 69 / 266

55
8-5. KEY Transitions
The KEY1 and KEY2 are displayed on the M/E output screens (M/E PGM and M/E PREV).
(1) Set up a key for the KEY. (See section 10. "KEY and DSK.")
(2) Perform a desired transition referring to the transition procedures below..
CUT Transition
<Method 1>
(1) Press KEY1 (or KEY2) in the NEXT TRANSITION block.
(2) Press CUT to perform a KEY CUT transition.
<Method 2>
Press the KEY1 ON AIR (or KEY2 ON AIR) button to insert the KEY on the M/E program video.
Press the button again to remove the KEY from the screen. (See section 8-9. " IN/OUT Effects
for PinP, KEY and DSK" for details.)
MIX Transition
<Method 1>
(1) Press KEY1 (or KEY2) in the NEXT TRANSITION block.
(2) Press MIX in the TRANSITION TYPE block.
(3) Press AUTO or KEY AUTO, or move the fader lever to perform the KEY MIX transition.
The KEY1 AUTO button behaves the same as the AUTO button when selecting KEY1 for
the next transition. For example, if MIX is set for the KEY1 transition type in the NEXT
TRANSITION section, pressing KEY1 AUTO performs the KEY1 mix transition and if
WIPE is set, pressing KEY1 AUTO performs the KEY1 wipe transition.
AUTO CUT
DVE
DVE
FADER LIMIT
DIRECTION
P IN P
1
P IN P
2
KEY 1
KEY 2
REV
BKGD
NOR/REV
KEY1
NEXT TRANSITION
TRANSITION TYPE
PATTERN
KEY2
WIPE MIX
TRANSITION
RATE
Method 1
Method 2
AUTO CUT
DVE
DVE
FADER LIMIT
DIRECTION
P IN P
1
P IN P
2
KEY 1
KEY 2
REV
BKGD
NOR/REV
KEY1
NEXT TRANSITION
TRANSITION TYPE
PATTERN
KEY2
WIPE MIX
TRANSITION
RATE