FOR-A HVS-350HS, Руководство по эксплуатации, Страница: 51 / 266

37
6. Video Outputs
6-1. How to Select Aux Signals
The AUX output signals can be selected from all bus sources (primary inputs, stills, mattes, etc.),
program, preview, clean and key out signals. There are two procedures to select signals for
auxiliary outputs: via bus buttons or from menu selection. If you want to select a signal easily
and quickly, select the signal in the KEY/AUX bus. If you want to select a signal not assigned to
bus buttons, select it in the menu.
6-1-1. Selecting Video via Bus Buttons
(1) Press an AUX button, from AUX1 to AUX8 indicated below.
(2) Press a button in the KEY/AUX bus section to select a signal for the selected AUX output.
AUX signal selection via bus buttons can be disabled if
AUX CTRL
is set to OFF in the
[SETUP - OUTPUT - AUX XPT] (2/2) menu to prevent any operational mistakes.
OUTPUT : M/EKEY: P/PKEY: AUX CONTRL : 2/2
AUX XPT : =D_PGM: =PPKEY: S=AUX1 E=
OFF :
6-1-2. Selecting Video from Menu Selection
(1) Press the MENU control button and then press the SETUP button to display the SETUP
menu's top page.
(2) Turn F1 to select OUTPUT. Press F1 or the page down button to display the [SETUP-
OUTPUT] menu.
(3) Turn F1 to select AUX XPT. Press F1 or the page down button to display the [SETUP-
OUTPUT-AUX XPT] menu.
SETUP :>MARKER >CLN/PREV>ANCI > AUX XPT
OUTPUT :>MV1 >MV2 >OPTION
(4) Turn F1 to select an AUX bus.
(5) Turn F2 to select a video signal.
OUTPUT :SELECT : XPT : TRANS RATE : 1/2
AUX XPT : =AUX1 : =BLACK: En= OFF =0 :
AUX
PREV MV1 CLEAN MV2
2 3 4 5 6 7 8 9 10 11 12 1
KEY/AUX
PGM PREV CLEAN PGM
M/E
2 3 4 5 6 7 8 1
P/P
DSK
2 3 4 1
KEYER
2 1 2
P IN P
1
13 14 15 16 17 18 19 20
AUX
PREV MV1 CLEAN MV2
2 3 4 5 6 7 8 9 10 11 12 1
KEY/AUX
PGM PREV CLEAN PGM
M/E
2 3 4 5 6 7 8 1
P/P
DSK
2 3 4 1
KEYER
2 1 2
P IN P
1
13 14 15 16 17 18 19 20