FOR-A HVS-350HS, Руководство по эксплуатации, Страница: 112 / 266

98
13. Clip Memory
Clip memory allows you to record and play output video. Video and key signals can also be
recorded at the same time. In addition, sequential image files can be transferred from HVS-35GUI
(optional) and saved in the memory as a video clip. The stored clip is played back using a still bus.
It can also be assigned to a bus button through a still bus and used for CG WIPE material.
Another application of this clip memory is a delay line, which continuously records output video and
outputs it from another bus with some delay.
IMPORTANT
The clip memory can store one clip of data with up to 60 frames (same size if video
and key). A clip can be played back on one still bus, but not on two or more stills at the
same time.
13-1. Recording
13-1-1. Recording Video
(1) Press the MENU control button in the SELECT/KEY PAD section, then press the STILL
button to display the [STILL] menu.
(2) Select CLIP under STILL1 (STILL2, STILL3 or STILL4).
(3) Press page down to go to PAGE 2.
(4) Turn F3 to select CL/DL under SOURCE2 ASSIGN.
(5)Turn F4 to select a video signal to record from MEPGM, MECLN, MEPREV, PGM CLN,
PREV, and AUX1 to AUX8. (See section 6. Video Outputs.")
STILL :SOURCE1 ASSIGN :SOURCE2 ASSIGN : 2/6
SIGNAL : =STILL: =MEPGM: =
CL/DL : = AUX1 :
(6) Go to PAGE4 in the [STILL] menu. Press F3 while holding down F2 to begin recording.
STILL : (STOP 1/0 ): VAR : 4/6
CLIP : >STOP : >REC : >PLAY : >1.0 : F=60
(7) Press F1[STOP] or F3[PAUSE] to stop recording. (Recording is automatically stopped
when the memory is full.)
STILL : (STOP 40/40): VAR : 4/6
CLIP : >STOP : >REC : >PAUSE: >1.0 : F=60
IMPORTANT
When a new video clip is recorded, the current clip data is cleared and the new clip
data is overwritten into the memory.
Clip status
Recorded frames
Current frame No.