FOR-A HVS-350HS, Руководство по эксплуатации, Страница: 240 / 266

Appendix 3 - 14
5-1-2. Selecting Video Sources on M/E or P/P
Press the desired bus button on the
PGM
bus row. The video signal assigned to the selected
bus button is displayed on the
program output
screen. At the factory default setting, the
PGM bus is the
upper
row and the PST bus is the
bottom
row.
Button Indication on the P/P and the M/E buses
M/E bus
Red
Indicates that the video is displayed on the P/P program screen.
(Re-entry)
Green Indicates that the video is displayed on the M/E program screen.
Orange Indicates that the video is set to next output on the M/E bus.
P/P bus
Red Indicates that the video is displayed on the P/P program screen.
Orange Indicates that the video is set to next output on the P/P bus.
5-1-3. Selecting Video Sources on KEY/AUX
(1) Press the desired output bus button in the Bus Select section.
Button When controlling M/E: When controlling P/P:
KEYER KEY1 DSK1
DSK KEY2 DSK2
PinP1 PinP1 DSK3
PinP2 PinP2 DSK4
AUX1-3 AUX1-3 (*1)
(*1) Select a signal in the [SETUP-OUTPUT-AUX] menu for AUX4 and successive buses.
(2) Press a button in the KEY/AUX bus section to select a signal for the selected output.
Signals selected by the PGM, PREV, CLEAN and MV buttons (AUX1-3 only)
Button Video signal
PGM M/E program
PREV M/E preview
CLEAN M/E clean
MV MV1
AUTO CUT
NOR/REV REV
BKGD
WIPE MIX
PGM
PST
12 11 10 9 8 7 6 5 4 1 2 3
KEYER
FADER LIMIT
DIRECTION
NEXT TRANSITION
PATTERN/RATE
TRANSITION TYPE
AUX P IN P
KEYER DSK
1 2 1 2 3
PGM CLEAN PREV MV
2 3 4 5 6 7 8 9 10 11 12 1
KEY/AUX
TRANS PREV
AUX P IN P
KEYER DSK
1 2 1 2 3
PGM CLEAN PREV MV
2 3 4 5 6 7 8 9 10 11 12 1
KEY/AUX
TRANS PREV