FOR-A HVS-350HS, Руководство по эксплуатации, Страница: 110 / 266

96
12. Still Store
The switcher can capture and memorize up to 4 still pictures from the switcher output video.
Captured stills can then be used as key source and insertion signals, M/E, P/P or AUX outputs by
assigning the stills to bus buttons (See section 5-2. "How to Assign Sources to Bus buttons" for
assigning stills.). Although the stored stills are cleared when the switcher is powered down, they
can be backed up to the Still memory in the switcher. Up to six still images can be stored to and
loaded from the memory. In addition, stored stills can also be saved to USB flash memory.
12-1. How to Save Stills
(1) Setup the image for program, preview or AUX output to be captured to still memory.
(2) Press the MENU control button and then STILL in the SELECT/KEYPAD block to display the
[STILL STORE] menu
(3) Press the page down button to go to PAGE2.
(4) Turn F1 to select STILL under SOURCE1 ASSIGN1. (If SOURCE2 ASSIGN is set to STILL,
change it to other than STILL.)
STILL :SOURCE1 ASSIGN :SOURCE2 ASSIGN : 2/6
SIGNAL : =
STILL : = MEPGM : =CLDL : =AUX1 :
(5) Turn F2 to select an output signal to be captured at the
SIGNAL
item in the menu. Available
settings are MEPGM, MEPRV, MECLN, PGM, PREV, CLN, AUX1-AUX8. (See section 6.
"Video Outputs" for details about these signals.)
(6 Press the page up button to go back to PAGE1.
(7) Then press F1 to save the image to STILL1, or F2 to save image to STILL2, and so on. A
beep will sound and the image will be saved to the selected still memory.
STILL :STILL1 :STILL2 :STILL3 :STILL4 : 1/6
STORE : >FRAME:>ODD : >EVEN : >FRAME:

Select a Loading Type When Displaying STILL
Loading type can be selected on PAGE 1. For example, to use an odd field image of STILL1 set
the menu as shown in the figure below. Selectable options are FRAME, ODD (odd field) and
EVEN (even field).
STILL :STILL1 :STILL2 :STILL3 :STILL4 : 1/6
STORE : =
ODD : >FRAME: >FRAME: >FRAME: