Fondital TAHITI CONDENSING KC24, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 40

4
CONTENTS
Warnings page 2
General information for the installer, maintenance technician and user page 3
1. Instructions for the User page 6
1.1. Control panel page 6
1.2. Operating the boiler page 8
1.2.1. Switching on page 8
1.2.2. Operation page 8
1.2.3. External temperature probe operation (optional equipment) page 9
1.3. Boiler shutdown page 10
1.3.1. Burner shut-down page 10
1.3.2. Shut-down due to overheating page 10
1.3.3. Shut-down due to incorrect fluid circulation page 10
1.3.4. Shut-down due to inadequate air/flue gas draught (flue gas shutdown) page 11
1.3.5. Shut-down due to fan malfunction page 11
1.3.6. Flow alarm page 11
1.3.7. Alarm due to failure of temperature probes page 11
1.3.8. Alarm due to remote control malfunction page 11
1.4. Maintenance page 11
1.5. Notes for the user page 11
2. Technical characteristics and dimensions page 12
2.1. Technical characteristics page 12
2.2. Dimensions page 14
2.3. Hydraulic layouts page 15
2.4. Operating data page 16
2.5. General characteristics page 17
3. Instructions for the fitter page 19
3.1. Installation standards page 19
3.2. Installation page 19
3.2.1. Packaging page 19
3.2.2. Choosing where to install the boiler page 19
3.2.3. Positioning the boiler page 20
3.2.4. Installing the boiler page 20
3.2.5. Boiler room ventilation page 21
3.2.6. Air/flue gas system page 21
3.2.6.1. Air/flue gas system duct configuration page 22
3.2.6.2. 100/60 mm and 125/80 mm air/flue gas coaxial duct system page 23
3.2.6.3. 80 mm air/flue gas split duct system page 24
3.2.7. Testing combustion efficiency page 24
3.2.7.1. “Chimney sweep” function page 24
3.2.7.2. Measurements page 25
3.2.8. Gas main connection page 26
3.2.9. Hydraulic connections page 26
3.2.10. Power main connection page 27
3.2.11. Selecting central heating output range page 27
3.2.12. Room thermostat connection (optional equipment) page 28
3.2.13. Open Therm remote control installation and operation procedure (optional equipment) page 28
3.2.14. External temperature probe installation (optional equipment) and “sliding temperature” operation page 29
3.2.15. Phone operation device installation (optional equipment) page 30
3.3. Loading the system page 30
3.4. Starting the boiler page 31
3.4.1. Preliminary checks page 31
3.4.2. Switching on and switching off page 31
3.5. Electric diagram page 32
3.6. Adaptation to other gases and burner adjustment page 33
4. Testing the boiler page 35
4.1. Preliminary checks page 35
4.2. Switching on and switching off page 35
5. Maintenance page 35
6. Troubleshooting page 36