Fondital MAUI KR 240 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 68

Fondital MAUI KR 240 Скачать руководство пользователя страница 67

ROUTINE CLEANING

The cleaning of the device and the removal of the combustion deposits from the exchange surfaces should be carried out at least
once a year by qualified personnel.
It is an essential condition to reduce consumption and emissions and to maintain the performance and reliability of the device
over time.

Prior to starting the cleaning operations:

- Turn the system (iG) and the device (lp) main switches to “OFF”

- Close the gas shut-off cocks.

exteRnal cleaninG

Use a cloth dampened in water and soap to clean the casing. In

case of tough stains, dampen the cloth in a 50% mixture of water

and denatured alcohol or use specific products.

After cleaning, carefully dry the casing.

WaRninGs

•

Do not use abrasive products, petrol or trichlorethene.

MAINTENANCE

We wish to point out that the PERsON iN CHARGE OF THE THERMAL sYsTEM is COMPELLED by Law to have the ROUTiNE
MAINTENANCE and the MEASURING OF ThE COMBUSTION EFFICIENCY carried out. These operations should be carried out only
by QUALiFiED PERsONNEL

The Technical Service is available to perform this important law obligation.

ROUTINE MAINTENANCE means:
-  Increased safety
-  Lower operating costs
-  Longer boiler life
-  The assurance not to incur high fines in the event of inspections.

IG

DSP

Ip

Vf

TST

- 67

-

USE - SYSTEM SUPER

vISOR

«
...
65
66
67
68
»

Содержание MAUI KR 240





































































Отзывы:

Нет отзывов