Fondital MAUI KR 240 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 68

Fondital MAUI KR 240 Скачать руководство пользователя страница 2

The device must be installed by qualified personnel and in compliance with the Technical Standards as well
as with the national and local prevailing laws.
It is moreover mandatory to abide by the instructions for safety, installation, maintenance and use given in
the manual.

Dear Customer,

We wish to thank you for choosing our condensing device, a technologically advanced and high quality product, which will ensure
you high energy efficiency and very low emissions. Our environmentally friendly products will satisfy your comfort needs at very
low operating costs.

Please read this manual with care before using the device, and always abide by the SAFETY WARNINGS AND STANDARDS.

Further, we would like to recommend to you to entrust specially qualified Technical Service personnel with the maintenance of the
device, making sure that they use only original spare parts.

This manual represents an integral part of the device, and must therefore be kept carefully for further reference and/or for being
supplied along with the device in case it is transferred to another Owner or User.

Best regards.

the management

maui devices comply with:

•  Gas Appliances Directive 2009/142/EC
•  Efficiency rating according to 92/42/EC
•  Low Voltage Directive 2006/95/EC
•  Electromagnetic Compatibility Directive 2004/108/EC
•  Energy Efficiency

✫✫✫✫

• "Condensate" Classification
• NOx 5 Class (< 70 mg/kWh)

Serial number and year of construction are given in the rating plate.

maui devices have a SPECIFIC WARRANTY starting from the date of validation made by our Technical Service personnel.
The barcode labels contained in the document envelope are to be applied to the relevant certificates.

WARRANTY

CONFORMITY

the management

- 2

-

GENERAL

«
1
2
3
4
...
»

Содержание MAUI KR 240





































































Отзывы:

Нет отзывов