- 41
-
INST
ALLA
TION
menu line
ref.
line title
meaning
6. CAsCADE
6.1.1
Cascade module delay
Time interval between the ignition of different boilers
6.1.2
Minimum modulation head output
Minimum available cascade output
6.1.3
Individual burner heat output
Maximum heat output of an individual burner
6.1.4
DHW boilers
Number of boilers allocated to DHW
6.1.5
PI loop time
Time interval needed for recalculation of the necessary heat output
6.1.6
Water flow delay
Delay in the response to the thermoregulation algorithm based on the hydraulic structure. If the cascade has a
circuit breaker, it is possible to calibrate the time after which a temperature variation, detected by the cascade
probe, is actually perceived by the control board.
6.1.7
Boiler with different heat output
Enabling or disabling of the algorithmic management of cascade boilers with different heat output values (e.g.,
when there is a reduced heat output generator for DHW production). If multiple generators with the same heat
output are used together, enabling the algorithm is not necessary.
6.1.8
Maximum cascade pump speed
Adjustment of the maximum speed allowed for the cascade pump
6.1.9
Minimum cascade pump speed
Adjustment of the minimum speed allowed for the cascade pump
6.2
Cascade information
Cascade information display.
6.3
Cascade autodetect
Cascade auto-configuration start
7. FACTORY sETTINGs
Restore factory settings
8. TYpE OF BOILER
8.1
Wall-hung
Setting of the type of boiler as “Wall-hung boiler” and selection of the model according to the heat output.
Change of the gas type in use
8.2
Base 1
Setting of the type of boiler as “Boiler with base” MAUI KR 115-280 and selection of the model according to the
heat output
Change of the gas type in use
8.3
Base 2
Setting of the type of boiler as “Boiler with base” MAUI KR 340-620 and selection of the model according to the
heat output
Change of the gas type in use