Fondital MAUI KR 240 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 68

Fondital MAUI KR 240 Скачать руководство пользователя страница 17

- 17

-

INST

ALLA

TION

hANDLING

After unpacking the device, handle it as described below:
- Remove the front panel (1) to ease the seizing and handling

operations.

- insert two 1" pipes (2) in the specific holes or slide the fork-

lift under (3) the packed device.

- Lift and handle the device.

b

WaRninGs

•

ALWAYs use accident-prevention protections.

•

in case of manual handling, do not exceed the maximum
weight lifted per person.

INSTALLATION ROOM

The installation room must always comply with the Technical
Rules and the prevailing Laws. it must feature suitably sized
aeration openings.

cleaR Zones (as an indication)

b

WaRninGs

•

Take into due consideration the space needed to access
the safety/setting devices and to carry out maintenance
operations.

•

it is FoRBidden to install the maui KR 115-280 devices
outdoors unless they are suitably protected against
weather agents.

≥

1 m

≥

1 m

2

3

1

«
...
15
16
17
18
19
...
»

Содержание MAUI KR 240





































































Отзывы:

Нет отзывов