Fondital ITACA CTFS 24, Руководство пользователя

Страница: 41 / 100

________________________________________________________________________________
41
AST 14 C 255/00
SECT. 5
OPERATING LOGIC
5.1 MAIN GENERAL CHARACTERISTICS

Function priority;

Boiler type selection;

Automatic flame control;

Ignition with ramp or at pre-set output;

DHW control;

Plate DHW modulation;

Boiler DHW modulation;

DHW COMFORT function;

CH control;

Temperature range pre-selection;

Ambient thermostat timer (antifast);

Adjustable CH maximum output;

Heating without ambient probe;

Heating with ambient probe;

Automatic operation;

Heating modulation;

Thermoregulation with ambient probe;

Thermoregulation with external probe;

Presetting for Remote Control;

Programmable multifunction relay;

Presetting for connection to supplementary boards;

Temperature probe integrity check;

Anti-shut-down function;

Post-ventilation function;

Pump post-circulation function;

Anti-freeze function;

Automatic filling function;

Anti-legionella function;

Gas proportional modulation coil integrity check;

Safety devices and functions;
FUNCTION PRIORITY
The following table shows main function enabling priorities in case of simultaneous request
of two or more functions.
Priority Status
1
Shut-down status (anti-freeze and anti-shut-down functions in pump only mode can anyway be
carried out)
2 Flue cleaning
3 Boiler anti-legionella (only for R version with water heater)
4 DHW request
5 Plate maintenance (COMFORT function)
6 DHW anti-freeze
7
Heating request in "DHW + CH" mode
8 Heating anti-freeze both in "DHW" and "DHW + CH" modes
9
Post-circulation
10
Pump anti-shut-down
11 Waiting for a request