________________________________________________________________________________
33
AST 14 C 255/00
SUPER-TECHNICAL parameter editing
To access the super-technical parameter programming, proceed as described in the previous paragraph
(press “reset” and
“boiler status” keys simultaneously for three seconds). Super-technical parameters are in
sequence after the 90th parameter.
The message “Cod” shows that a code must be entered (default 1398) with the “+ and –
heating” keys (confirm each single number with the “ok” key).
After entering the correct entry code, an icon will be displayed, showing
that the
super-technical parameter area has been accessed. It is now possible to select and edit
the desired parameters following the same procedure described in the previous paragraph
(“ok” key to access the parameter and "+/- heating” key to change its value).
Then confirm the modification of the parameter value by pressing the “ok-info” key again
and scroll the list to edit more parameters, or quit the setting with the “reset” key.
