Fondital Gazelle EVO 3000, Инструкции по установке, использованию и обслуживанию

Страница: 25 / 52

25
4.4 Connection to the electrical mains
WARNING
Gazelle EVO must be connected to a power supply system which complies with the existing technical standards.
It is forbidden to connect the convection stove to a system lacking a differential switch to protect the stove power line.
Any connection to an electrical system lacking a grounding system is forbidden.
WARNING
The convection stove must be powered with a proper mains voltage.
Proper mains voltage is specified on the label found on the power cable supplied and already connected and is equal to
230 V.
Gazelle EVO comes with a double insulated power cable, 1.5 metre long, with ground cable.
The power cable is routed through a grommet and should not be removed from it.
The power cable ends are crimped.
Power supply features a fuse F3.15A in series to the phase on-board the PCB.
Connection to the mains must be made through a two-pole switch or a polarised socket to help maintenance operations and allow
equipment disconnection before long inactivity.
If power cable length is not sufficient to connect the equipment, proceed as follows:
- cut the supplied power cable upstream of the grommet
- connect the new power cable of suitable length to the cut end so that it goes through the grommet.
Do not power the equipment using a cable not going through the grommet.
The gas convective stove Gazelle EVO is suitable for:
1. connection to an external ambient thermostat or chronothermostat (optional);
2. connection to a telephone dial for remote ignition (optional);
3. connection of several stoves to a single remote thermostat/chronothermostat or telephone dial;
4. connection to a remote ambient temperature probe.
NB: to effectively control the equipment via an external thermostat or chronothermostat, select the maximum ambient tem-
perature value using the knob on user's interface and keep equipment on in manual mode.
Bloccacavo
Fig. 22
Cable fastener