Fondital Gazelle EVO 3000, Инструкции по установке, использованию и обслуживанию

Страница: 31 / 52

31
5. MAINTENANCE
WARNING
Equipment must be maintained by qualified personnel only, under the requirements set forth by the prevailing regulations.
The user is strongly advised to have the product serviced and repaired by a Service Centre or qualified personnel, pursuant to
prevailing laws.
WARNING
The user may only access parts of the equipment that can be reached without using special equipment or tools. The user
is not authorised to remove the equipment casing or to operate on any internal parts.
The user can use the equipment only when casing is installed and fastened.
WARNING
Carry out maintenance when equipment is not operating, cold, disconnected from the mains and gas tap closed.
5.1 Routine maintenance
The boiler must be serviced at least once every year.
Maintenance operations include check and cleaning procedures. In particular:
Inspections and checks
• Check general integrity of the equipment.
• Check equipment gas circuit and gas supply for leakage.
• Check gas supply pressure.
• Check equipment ignition.
•
Check the condition and seal integrity of the flue gas venting pipes.
• Check integrity of safety devices of the equipment in general.
• Check combustion chamber tightness.
•
Check equipment combustion parameters by flue gas analysis.
• Check the operation of combustion fan and tangential fan.
• Check absence of deformation and/or corrosion of the exchanger body.
The following cleaning is to be done
• General cleaning of the equipment.
• Clean the exchanger body external surface
• Clean the gas nozzles.
•
Clean the air intake and flue gas venting circuits.
• Clean the combustion fan and tangential fan.
When checking the equipment for the very first time, also verify:
• Boiler room suitability.
•
Diameter and length of flue gas system ducts.
• Equipment installation in accordance to this manual's instructions.
WARNING
The manufacturer shall not be held responsible for damage to people, animals, or property due to tampering with or
improper intervention to the equipment or failed/poor maintenance.