Foma SH700i, Руководство пользователя

Страница: 505 / 588

503
Da
ta
Com
m
uni
c
a
tio
n
ATI<n>
[M]
Displays the verification
code.
*2
n=0: NTT DoCoMo
n=1: Display abbreviated product name
(FOMA SH700i)
n=2: Display the product version in a format
such as VerX.XX
ATI0
o
NTT DoCoMo
OK
ATO
[M]
Returns to online data mode
from online command mode
during communication.
*2
―
ATO
o
CONNECT
ATQ<n>
[M]
Sets whether to display result
codes.
*1
n=0: Display result codes (default setting)
n=1: Do not display result codes ATQ0
o
OK
ATV<n>
[M]
Sets manner of displaying
result codes.
*1
Displays all result codes as numbers or text.
n=0: Display result codes as numbers
n=1: Display result codes as text (default
setting)
ATV1
o
OK
ATX<n>
[M]
Sets whether to include
speed in the CONNECT
display when connecting.
Also detects busy tone or dial
tone.
*1
Busy tone detection:
Sends BUSY response when number
dialed is busy.
Dial tone detection:
Determines whether FOMA terminal is
connected.
Speed display:
Sets whether to include speed in the
CONNECT display when connecting.
n=0: No busy tone detection, no dial tone
detection, no speed display
n=1: No busy tone detection, no dial tone
detection, speed display
n=2: No busy tone detection, dial tone
detection, speed display
n=3: Busy tone detection, no dial tone
detection, speed display
n=4: Busy tone detection, dial tone
detection, speed dial (default setting)
ATX1
o
OK
ATZ<n>
[M]
Resets the FOMA terminal’s
AT command settings.
*2, *4
Resets the FOMA terminal’s AT command
settings to the values set in non-volatile
memory. If this command is entered during
communication, the line is disconnected
before settings are reset.
Can only be set as n=0 (may be omitted). (When online)
ATZ
o
NO CARRIER
(When offline)
ATZ
o
OK
ATS0=<n>
[M]
Set number of rings before
FOMA terminal automatically
receives.
*1
n=0: No automatic receiving (Default
setting)
n=1 to 255: Automatically received after set
number of rings
ATS0=0
o
OK
ATS2=<n>
[M]
Sets the escape character. n=0 to 127 (default setting: n=43)
When n=127 is set, escape is disabled. ATS2=43
o
OK
ATS2?
o
043
OK
ATS3=<n>
[M]
Sets the carriage return (CR)
character. Defines the character used to recognize the
end of a AT command character string.
Appended to the end of the echoed
command character string and result code.
The setting cannot be changed (default
setting: n=13). ATS3=13
o
OK
ATS3?
o
013
OK
ATS4=<n>
[M]
Sets the line feed (LF)
character. Appended after the CR character, when
result codes are displayed as text. The
setting cannot be changed (default setting:
n=10). ATS4=10
o
OK
ATS4?
o
010
OK
AT Command Overview Parameter/Explanation
Execution
Example
dv22̲e.book Page 503 Monday, February 14, 2005 4:58 PM