Foma SH700i, Руководство пользователя

Страница: 392 / 588

390
Dis
p
lay
ing
/Editin
g
/M
ana
g
ing Data
Terminal security code and authentication password entry are required for sending or
receiving all data items.
For terminal security code, enter current security code (four to eight digits) set in the FOMA terminal.
Authentication password is a password exclusively for Ir exchange. Before starting data transfer, the sender and receiver
must enter the same user-specified four-digit password. This password can be changed for each Ir exchange operation.
Use Ir exchange to send/receive data individually on the FOMA terminal.
Refer to P. 388 for details on data that can be sent and received.
Send one data item, operating from the list screen or details screen of data to send.
Example: When sending phonebook entry
Receive one data item, operating from the Ir data receiving screen.
Note
When Ir exchange could not be performed properly, the following messages appear.
Authentication failed. Retry?
No response. Retry?
If these messages appear, select Yes to try again.
If Ir exchange fails, move the FOMA terminals close and try again.
Images sent by Ir exchange may deteriorate in image quality or may have different file sizes.
Depending on the receiving terminal, even when titles 19 single-byte (10 double-byte) characters or more
are sent, only up to 18 single-byte (9 double-byte) characters can be received.
Authentication Password
Sending and Receiving Data Individually
Sending Single Data Item <Send Ir Data>
1
In phonebook list (
n
P. 104) or details screen (
n
P. 105), select
data, press
C
, select Send Ir data and press
t
.
Operation can be performed using sub menu numbers, however, numbers differ
depending on the type of screen or data to be sent.
2 Set receiving FOMA terminal to receive single data item, press
1
,
select Yes and press
t
[Send].
Data sending begins.
When completed, Exchange completed appears, and the previous screen reappears.
Receiving Single Data Item <Receive Ir Data>
1 In stand-by, press
t821
, select Yes and press
t
.
When phonebook is
received
Alternatively, select
.
(Tools)
→
Receive Ir data
→
Receive from Top menu.
The terminal waits to receive data. Data is automatically received when data is
sent within 30 seconds.
When receiving is completed, a confirmation screen appears.
?
dv22̲e.book Page 390 Monday, February 14, 2005 4:58 PM