Foma SH700i, Руководство пользователя

Страница: 498 / 588

496
Da
ta
Com
m
uni
c
a
tio
n
Send data from a PC to a FOMA terminal one item at a
time.
Sending one item at a time from a FOMA terminal to a
PC is not possible.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
Send and receive all data at once, between a PC and
the FOMA terminal.
Write all and Read all operations require data transfer
software and your FOMA terminal authentication
password.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
Sending One Data Item (Write One)
1 Send data from a PC using data
transfer software (Write one).
Refer to the software manual for details on
sending data.
Note
When phonebook data is sent (from a PC to the
FOMA terminal handset) one entry at a time,
entries are saved to the smallest available memory
number from
010 to 499 . If all memory numbers
from 010 to 499 are already used, entries are
saved to the smallest available memory number
between
000 and 009 (2-touch dialing
n
P. 110).
When phonebook data is received and 500 entries
(names, phone numbers, or mail addresses) are
already registered, or more than 500 entries have
been registered, a message appears notifying that no
further entries can be saved.
Sending All Data (Write All/Read All)
1 Send data from a PC using data
transfer software (Forward all).
Refer to the software manual for details on
sending data.
Entering your authentication password on the
PC will be necessary.
Enter your authentication password (four
digits).
2 Enter terminal security code
(four to eight digits) and the
authentication password (four
digits).
3 Start data transmission.
Note
Performing Write all from a PC to your FOMA
terminal replaces all data stored in the FOMA
terminal. All data previously stored in your FOMA
terminal will be deleted. This includes phonebook,
schedule, and protected mail data saved as secret
data.
If an error occurs during data transmission from a
PC to the FOMA terminal, all data stored in the
FOMA terminal may be deleted. Check the cable
connection, the FOMA terminal battery level, and
the PC power supply before performing Write all.
Performing operations while charging the FOMA
terminal in the desktop holder is recommended.
Depending on the connected device, the
transmission status (bar display) may not appear.
dv22̲e.book Page 496 Monday, February 14, 2005 4:58 PM