Foma SH700i, Руководство пользователя

Страница: 489 / 588

487
Da
ta
Com
m
uni
c
a
tio
n
J
To confirm APN settings using
AT commands
AT+CGDCONT?
o
Refer to P. 499 for details on AT commands.
J
When nothing appears on the screen
when AT commands are entered
ATE1
o
Refer to P. 502 for details on AT commands.
Handset number is important personal
information. Use caution when setting.
J
Send/Not send setting on dial-up
networks
Adding 186 (Send) and 184 (Not send) to the
host number in dial-up networks is also possible.
Setting
186 (Send) and 184 (Not send) in both
the
*
DGPIR command setting and the dial-up
network setting results in the following.
To return 186 (Send) or 184 (Not send) to Not set
(default setting), enter AT
*
DGPIR=0 .
Set either Send or Not set for sending caller ID when
using mopera, the DoCoMo Internet Connection Service.
Set the host and TCP/IP protocol. Contact the
Internet service provider or network
administrator for more information on settings.
J
Hosts
For packet transmissions, set the host (APN)
in advance. Register numbers (cid) 1 to 10 for
the host (APN) in advance, to enable using
packet transmission by specifying control
numbers. Host (APN) settings are the
equivalent to a phonebook for packet
transmissions on a PC. Compared to normal
phonebook entries, they appear as follows.
For example, when the mopera host (APN),
mopera.ne.jp , is registered for cid1,
connecting to mopera by specifying the host
number
*
99
***
1# is possible. Other
registered cids can be used similarly.
Setting Send/Not Send Caller ID
1 Follow steps 1 to 5 on P. 485.
2 Set either Send caller ID (186)
or Not send caller ID (184)
during packet transmission.
Enter in the format: AT
*
DGPIR=<n>.
(
n
P. 499)
AT
*
DGPIR=1
o
:
Adds 184 when packet transmission is
established with the host (APN).
AT
*
DGPIR=2
o
:
Adds 186 when packet transmission is
established with the host (APN).
3 Confirm that OK appears.
Dial-up network
setting
(when <cid>=1)
Using the
*
DGPIR
command Send/
Not send setting
Send/Not send
caller ID
*
99
***
1#
Not set
(default setting) Send
Not send Not send
Send Send
184
*
99
***
1#
Not set
(default setting) Not send
(dial-up network
184 is given
priority)
Not send
Send
186
*
99
***
1#
Not set
(default setting) Send
(dial-up network
186 is given
priority)
Not send
Send
Setting the Dial-up Network
In phonebook In Packet transmission setting
Registered number
(memory number) Control numbers (cids) 1 to 10
Other party’s name Host name (host (APN))
Other party’s phone
number *
99
***
<cid> #
dv22̲e.book Page 487 Monday, February 14, 2005 4:58 PM