Foma SH700i, Руководство пользователя

Страница: 165 / 588

163
Ca
m
e
ra
J
Clean the lens before shooting images
Fingerprints or oil on the lens may cause images to blur and rays of light may appear in images when shot
near a strong light source. Wipe the lens with a soft cloth before shooting images.
J
Do not shoot images while the handset is charging
Images may appear dark and distorted when shot with insufficient battery power.
J
Do not apply force to the lens
Do not apply force to the lens when closing the FOMA terminal as this may damage the lens.
J
The main camera uses a CCD camera and the sub camera uses a
CMOS camera
Although the cameras are made with high-precision technology, constantly bright or dark pixels or lines may
be visible. Further, white lines and other noise may appear in images especially when shooting images in
dimly lit surroundings.
The quality of images may deteriorate when shot or saved after the FOMA terminal has been left in a warm
location for a long time.
If the cameras are exposed to direct sunlight for a long time, the internal color filter may discolor, creating a
discoloration of shot images.
Images shot of the sun, a light or other strong light source will appear dark and distorted.
Direct images shot of the sun may damage the performance of the CCD (image sensor).
J
Select the image quality according to the application
To give priority to the image quality when shooting an image, select SUPER FINE . The data size will be
larger, but the image quality will be better.
At these image size settings, fewer images can be saved, more time is required to send these images by
i-mode mail and the images may be reduced when sent. Select the image quality according to the application.
(
n
P. 179)
J
Set Closeup mode when shooting close subjects
Slide Closeup switch to
h
to shoot clear images at close range. Recommended mode for shooting close
subjects (approximately 10 cm). (
n
P. 175)
J
Important notes for shooting images
The color and brightness of the subject in images shot with the cameras may differ from the actual color and
brightness.
Images shot of the sun, a light or other strong light source will appear dark and distorted.
Make sure that your fingers, hair and handset strap do not obscure the camera lens when shooting images.
Because battery power is depleted more quickly when shooting images, it is recommended to press
H
to
end Camera mode after shooting images.
If a voice/video-phone call is received or the alarm sounds when viewing the still picture preview screen or movie
recording screen, the camera function is canceled and the voice/video-phone call or alarm screen appears. After
that screen ends, the camera screen reappears and the previous still picture or movie data can be saved.
The Auto timer is canceled if a voice/video-phone call is received or the alarm sounds when the Auto timer is enabled.
Camera shutter sound volume cannot be changed. The shutter sound is also audible during Manner mode
and Drive mode and when the flat-plug earphone/microphone with switch (sold separately) is connected.
Picture light can be activated to flash while shooting images.
Moving the FOMA terminal while shooting images may cause images to become blurred. Shoot images while
holding the handset as still as possible or use the Auto timer.
Because a larger image size requires more data, movement in the image on the FOMA terminal display may
appear slow.
Indoor fluorescent lighting may create flickering or streaky shading on the screen. This flickering or shading
may be reduced by changing the lighting conditions or brightness or adjusting the camera brightness.
After switching from the main camera to the sub camera, it may take time for the brightness and tone to
correctly appear.
Using the Cameras
dv22̲e.book Page 163 Monday, February 14, 2005 4:58 PM