Foma SH700i, Руководство пользователя

Страница: 216 / 588

214
i-m
ode
If the characters on an web page do not appear properly, convert to proper characters and
view again.
The FOMA terminal records up to ten web pages accessed from Go to location of i-mode
menu.
Use the history to reconnect to those web pages.
2 Enter URL and press
t
.
Enter up to 512 single-byte characters (including http:// ).
Web page appears.
Steps when viewing are the same as for sites.
When the URL is incorrect
Press
c
to erase the character the cursor is on or the last character.
Press
c
for 1+ seconds when the cursor is on the first character or after the last character to erase
all the characters.
To disconnect
Press
i
[Cancel] while connecting (
=
flashes).
To end connection
Press
H
, select Yes and press
t
.
Note
Press
c
without entering characters to return to i-mode menu.
If the received data exceeds the maximum size for a page, Size of this page is not supported . appears,
data transmission stops and only received data appears.
Connecting to another site when viewing sites or web pages
Press
C*
. Subsequent steps are the same as step 2.
Viewing Web Pages with Correct Characters <Character Code>
1 When browsing (
n
steps 1 to 3 on P. 204, steps 1 and 2 on P. 213),
press
C
, select
#
Character code and press
t
.
View web pages with correct characters.
If characters do not appear properly, repeat step.
Note
Changing character code when properly shown may render site unreadable.
Some pages may not appear properly after changing character code.
After character code changes four times, web page returns to original code.
Code returns to original code after reloading page or scrolling to next/previous page.
Viewing Pages with URL History <URL History>
1 In stand-by, press
i7
.
Alternatively, select
*
(i-mode)
→
URL history from Top menu.
The URL history list appears.
2 Select URL and press
t
.
After the connection screen, the web page appears.
dv22̲e.book Page 214 Monday, February 14, 2005 4:58 PM