Foma SH700i, Руководство пользователя

Страница: 231 / 588

229
i-m
ode
J
Changing hosts
Save hosts in advance in order to access.
2 Enter host number, press
2
, enter terminal security code (four to
eight digits) and press
t
.
Numbers are masked with asterisks.
3 Enter host name and press
t
.
Host
○
appears when saving a new host. (The host number entered in step 2 appears for the
○
.)
Press
c
for 1+ seconds to erase host name.
Enter up to 16 single-byte (8 double-byte) characters.
4 Enter host and press
t
.
Enter up to 99 single-byte alphanumeric characters and symbols.
5 Enter host address and press
t
.
Enter up to 30 single-byte alphanumeric characters and symbols.
1 In stand-by, press
i912
.
Alternatively, select
*
(i-mode)
→
i-mode setting
→
Shared
→
Host selection from Top menu.
Host selection screen appears.
2 Enter host number and press
1
[Set].
Note
Settings do not need to be changed to use i-mode.
N
i-mode (UIM) , which appears on host selection screen, is one of the following (depends on area in
which i-mode is registered).
DoCoMo Hokkaido, DoCoMo Tohoku, DoCoMo, DoCoMo Tokai, DoCoMo Hokuriku, DoCoMo Kansai,
DoCoMo Chugoku, DoCoMo Shikoku, DoCoMo Kyushu
Default connection information cannot be changed.
Setting Data Use During Flash Playback <Saved Data>
Default setting
Use
1 In stand-by, press
i935
.
Alternatively, select
*
(i-mode)
→
i-mode setting
→
Internet
→
Saved data from Top menu.
Saved data setting screen appears.
Reset saved contents <Reset>
1 In the screen in step 1 of “Saving hosts”, select host number
?
t
?
3
?
enter terminal security code (four to eight digits)
?
t
.
Note
When hosts are reset, host is set to i-mode (UIM) .
Related Operations
dv22̲e.book Page 229 Monday, February 14, 2005 4:58 PM