FOLSOM Blend PRO BP-2002, Инструкция по установке и эксплуатации

Страница: 79 / 89

Manual # 26-0206000-00 / Revision A BlendPRO – Wide Screen Image Processor 65
Example: OFRATEBP 0 (Sets output frame rate to 50Hz.)
OFRATEBP? (Returns output frame rate.)
Command:
OSYNCBP o n
Description: Adjusts the Output Sync.
Parameters: o - Output Screen; [1-4]
n - Sync mode; [0|1|2|3|4|5], SOG|-C|+H+V|+H-V|-H+V|-H-V
Query:
OSYNCBP? o
Returns the Output Sync mode in the format:
=n
Example: OSYNCBP 1 3 (Adjusts the Output Sync value on output one to be +H-V.)
OSYNCBP? 2 (Returns the Output Sync mode on output two.)
Command:
OTPMBP o typ bx gr
Description: Selects the Output Test Pattern mode and selects the Test Pattern options.
Parameters: o - Output Screen; [1-4]
typ - Test Pattern Type; [0-10],
OFF|ALIGNMENT|BURST1 (1 pixel on, 1 pixel off)|BURST2 (2 pixel on, 2 pixel
off)|HORIZONTAL BARS|BLACK|GREY 25%|GREY 50%|
GREY 75%|WHITE|HORIZONTAL RAMP
bx - Test Pattern Raster Box; [0|1], Off|On
gr - Test Pattern Grid; [0|1], Off|On
Query:
OTPMBP? o
Returns the output test pattern and option mode settings in the format:
= typ bx gr
Example: OTPMBP 4 2 1 1 (Burst 1 test pattern has been selected with raster box on,
and grid on for output screen 4.)
OTPMBP 5 0 1 0 (Set raster box on for all output screens.)
OTPMBP? 3
(Returns the output test pattern mode and option settings for output screen 3.)
Command:
PRJ cfg num
Description: Sets up projector configuration, recalculates blending and data doubling registers to reflect new
settings
Parameters: cfg - Projector Config; [0|1], 1-4|5-8
num - Total Number of Projectors; [1-8]
Query:
PRJ?
Returns the Projector Configuration in the format:
=cfg num
Example: PRJ 0 4 (Set projector configuration for 1-4. Set total projectors to be 4.)
Command:
RESETBP op
Description: Resets the system to factory defaults
Parameters: op - Reset operation; [R|F], Restart|Factory
Example: RESETBP F (Resets system to factory defaults and resets all user input configuration files.)
Command:
RGBADJ in type
Description: Automatic RGB color adjustment. The HBars1 test pattern must be coming into the input channels
being used prior to using this functionality.
Parameters: out - Output Screen; [1-4]. If out is not defined, auto position adjustment done on all output