FOLSOM Blend PRO BP-2002, Инструкция по установке и эксплуатации

Страница: 56 / 89

42
BlendPRO – Wide Screen Image Processor Manual # 26-0206000-00 / Revision A
Menu Control
The adjustment knob as well as the SEL and ESC keys are used to navigate through a series of menus displayed on
the VFD display. The menus are used to enter setup parameters. Once setup parameters are entered, they are
stored in non-volatile memory for future use using the system save menu item. Pressing one of the four hot keys will
call up the corresponding menu on the VFD.
The user can scroll through the menu items by turning the ADJUST control knob. A pointer (>) at the left of a menu
item indicates the current position of the scroll bar. When the desired menu item is reached, the user presses the
SEL key to select that menu item. The sub-menu pointer (>>) at the right of a menu item indicates that a sub-menu
will be displayed if that menu item is selected. The pointer at the left hand side of the display changes to a pound sign
(#) indicating that a parameter is selected. After a parameter has been selected, the user can modify the associated
parameter values by turning the ADJUST control knob. The operator can accept the changes with SEL or press ESC
to exit the current menu item without modifying current settings.
In this section, the Factory Reset values are displayed in the menu diagram.
Menu Operation
BlendPRO’s primary menu is the Setup Menu illustrated below. Setup information is stored in non-volatile memory
within BlendPRO
TM
and is automatically recalled each time the unit is turned on. After BlendPRO completes its
power on sequence, the SETUP MENU is displayed.
SETUP MENU
INPUT SETUP >>
BLEND SETUP >>
TEST PATTERN >>
SYSTEM OPTIONS >>
SYSTEM STATUS >>
SYSTEM SAVE