TView Pro AV 1600 User's Manual Rev 1.02
35
Appendix D - Component output
All versions of the Pro AV 1600 support two user selectable forms of component output. The TView Pro AV 1600 is
factory configured for Betacam component (Y, R-Y, B-Y) and RGB (without 7.5 IRE units of video setup). In addition,
component output synchronization may be provide as a separate, composite sync signal (4 wire) or as composite
sync signal on the green output (3 wire). Other amplitudes of component output ( i. e. M II) are available by special
order.
