Focus Industries Handler I, Руководство пользователя, Страница: 11 / 48

11 Handler I, II & III Operator’s Manual - October 2008
Attach the other end of the venturi hose assembly to the
bypass assembly. (See Fig. H1-4.6) Fasten hose with MC24
hose clamps (54-75624)
Cut and attach the appropriate length of ¾” hose (54-79200)
to connect the hose barb on the agitation valve assembly to
the hose barb on the top left hand side of the bypass assem-
bly. (See Fig. H1-4.7) Fasten hose with MC12 hose clamps
(53-75612)
Step 5
Hose and Clamp Installation
Figure H1-4.7
Cut and attach the appropriate length of ¾” hose to connect
the hose barb on the rinse valve assembly to the hose barb
on the top of the bypass assembly. (See Fig. H1-4.7) Again
fasten hose with MC12 hose clamps.
Tighten all fittings, bolts and hose clamps as necessary.
NOTE: Also check fly nut on anti-vortex fitting on tank
bottom. Tighten as necessary using pump pliers.
Your Handler 1-i15T is now completely assembled. Instructions
for the manifold package will follow. You may now continue to
the operation section of the manual starting on page 28.
2.
3.
1.
2.
•
Manifold System
Step 1
Agitation & rinse valve installation
Assemble and thread agitation valve assembly (see Fig.
H1-4.1) into the ¾ bulkhead on the left side of the tank. (See
Fig.4.2 H1-4.2)
Note: Apply sealant before installing.
Install assemblies so that the hose barb points to the front.
(Bracket side of tank.) (See Fig. H1-4.2
Thread rinse valve assembly (See Fig. H1-4.1) into the ¾”
bulkhead on the right side of the tank. (See Fig. H1-4.2)
Step 2
Venturi assembly
Figure H1-4.8
Thread venturi valve assembly on to anti-vortex fitting on
tank bottom. Position valve handle for easy access.
(See Fig H1-4.8)
NOTE: Be sure to use sealant as per instructions
Figure H1-4.9
Attach venturi to valve assembly flange with clamp and gas-
ket. Do not tighten completely yet. Position discharge end
of venturi so it points to the front left (in-between the tabs
welded on the frame). (See Fig H1-4.9)
1.
•
2.
3.
1.
•
2.