FOCO INSERTO 13, Руководство пользователя

Страница: 99 / 290

27
EN
Shutting the Insert down
In the period when the Thermoinsert is out of
use it must be disconnected from the electricity
mains. For greater safety, especially if there are
children around, we recommend removing the
power cable from the rear of the Insert.
Before placing the Insert in storage, you should
remove all pellets from the hopper with a vacuum
cleaner with a long extension. If the fuel is left in
the hopper, it may get damp, stick together, and
be diffi cult to light at the beginning of the next
season. If pressing the main switch (located on
the back of the Insert) does not make the control
panel display light up, it could mean that the
service fuse needs replacing. On the rear of the
Insert there is a fuse holding compartment which
is located underneath the supply socket. With a
screwdriver open the cover of the fuse holding
compartment, and re place the fuse if necessary
(3,15 AT delayed type). Plug the unit back in and
press the main switch.
CLEANING BY THE TECHNICAL
Check every year
Compartment ventilation fl ue gas cleaning
Remove the fi xing screws and remove the smoke
fan for cleaning of the same. Perform the task
with the greatest care not to bend the fan blades.
Clean fl ue
Clean the fl ue system especially near the fi ttings
to “T”, curves and any horizontal sections. Is
necessary to check and remove any deposit of ash
and soot before the same clogging the passage
of smoke.