FOCO INSERTO 13, Руководство пользователя

Страница: 79 / 290

7
EN
It is recommended the control of emissions after installation.
In order to achieve the test report results, please load the performance parameters retained
by the manufacturer and the qualifi ed technician. They will use these parameters once
verifi ed that, during the installation, it is possibile to reproduce the laboratory conditions.
PARAMETER M. UNITS
I CP13_13C ICP15_15C
Global heat output kW 13,3 15,1
Nominal heat output kW 12 13,5
Reduced heat output kW 5,5 5,5
CO concentration at nominal reference (13% O
2
) mg/m 3 84 66
CO concentration at reduced reference (13% O
2
) mg/m
3
291 291
Nominal effi ciency
% 90,6 89,2
Reduced effi ciency
% 93,4 93,4
Pellet consumption (min-max)
Kg/h 1,2 - 2,7 1,2 - 3,1
Heated surface mc 320 350
Flue gas fl ow rate (min-max)
g/s 5,78 - 9,26 5,78 - 10,73
Draft (min-max)
Pa 3 - 12 3 - 12
Flue gas temperature (min-max)
°C 88 - 148 88 - 170
Tank capacity Kg 22 22
Smoke outlet tube
mm 80 80
Diameter air intake
mm 50 50
Nominal voltage
V 230 230
Nominal frequency Hz 50 50
Power consumption max
W 390 390
Nominal Power consumption
W 115 120
Hydro Insert weight
Kg 108 108
Hydro Insert weight with base Kg 145 145
EEI
128 126
N° Test Report K 2343 2019 E2
Energetic class
A +
Ambiental decree n.186
Dust at 13% O2 at nominal heat output mg/m
3
20 20