FOCO INSERTO 13, Руководство пользователя

Страница: 97 / 290

25
EN
Maintenance and cleaning
◊ by the user / • by the authorised qualifi ed technical assistance
All cleaning of all parts must be carried out with the Insert completely cold and
unplugged to avoid burns and thermal shock. The Insert does not need much
maintenance if used with certifi ed quality pellet. The need for maintenance
varies depending on the conditions of use (switching on and off repeatedly) and
depending on the performance required. It is recommended periodic monitoring
of the Insert to check its condition.
Parts
Everyday
Every 2-3
days
Every
week Every 15
days
Every 30
days
Every 60-
90 days
Every 1
year
Brazier
◊
Cleaning the ash collection
compartment with suction device
◊
Cleaning ash tray
◊
Cleaning the interior heat
exchanger /
smoke fan compartment
•
Cleaning complete exchanger •
Clean "T" to exhaust
•
Flue
•
Door gasket ash •
Internal parts •
Flue pipe
•
Electromechanical components •
The Insert requires a simple and thorough cleaning
in order to ensure a more effi cient performance
and smooth operation. While cleaning the inside
of the Insert, to prevent the escape of ashes,
you can start the fan fl ue exhaust. Clean the
grate from the ash and any incrustation which
could obstruct the passage of air. In the case
of depletion of pellets in the tank,the burn
pot may accumulate unburned pellet. Always
empty the residuals from the grate before each
start. Remember that only a brazier located and
clean properly can ensure ignition and optimal
operation of your Insert. When positioning the
crucible, carefully check that the edges of the
crucible adhere completely to their place and that
the hole coincides with the tube dedicated to
the passage of the resistance. There must be no
combustion residue in the contact zone between
the edges of the crucible and the support surface
on the sink-holder.
BY THE USER
Daily control