Table 13.1: Page Triggers Events
Event
Description
Airspace Warning
This event occurs when the horizontal, or vertical distance to an airspace
is less then the respective thresholds.
Entering Thermal
This event occurs when the pilot enters in a thermal.
Transition
This event occurs when the pilot enters leaves a thermal and starts a
transition.
Arriving at Turnpoint
This event occurs when the pilot is arriving at less than 1km away from
the turnpoint
Start Opened
This event occurs immediately after the start time.
Power Up
This event is triggered when the instrument is powered up.
Figure 13.12: Inverse Titles
The figure of the left shows the normal display and that on the right shows the same display
with inverse titles set to
Yes
.
13.9
Language/Units
The
Language and Units
menu option allows the user to change the NAV interface language and
units. A short description off the available options for this menu are shown in Table
13.2
.
The UP, and DOWN keys, can be used to change each field option. Pushing the ENTER key
confirms the current field value, and highlights the following field. Pushing, the MENU key will
undo changes.
Table 13.2: Language/Units Menu Options
Function
Description
Language
Defines the interface language.
Alti. Units
Altitude Units. Altitude can be show in Meters, or Feet.
Roc. Units
Rate of Climb Units. ROC can be show in m/s, or 10 x Feet/ min
Continued on next page
54
Содержание NAV
Страница 1: ...User manual Document version 3 4...
Страница 25: ...24...
Страница 37: ...Figure 8 2 Critical Airspace Data 36...
Страница 61: ...Figure 14 1 Firmware Update 60...