5.1
Waypoints Actions Menu
On entering the waypoint actions menu (WAM) the selected waypoint becomes grayed indicating
that waypoint specific actions will be carried out using the selected waypoint. Once the WAM is
active a list of options appears in the DO area. A short description of each option is show in Table
5.1
.
Table 5.1: Waypoint Menu Options
Action
Description
Add WP to Task
Adds the selected waypoint to the end of the task.
Insert New WP
Starts a new waypoint entry. The current location is automatically
used for default waypoint data.
Edit WP
Start editing the selected waypoint.
Delete WP
Delete the selected waypoint. If the waypoint is being used in the
task this option is disabled.
Delete
all
way-
points
Deletes all waypoints and task.
Go to Point
Forces navigation to the selected waypoint. This overrides the
task navigation.
Edit Task
Starts editing task. If no waypoints have been added to the task
this option is disabled.
5.1.1
Add Waypoint to Route
To add a waypoint to the task, select the waypoint that is to be added by pressing either the UP
or DOWN buttons until the desired waypoint is reached. Pressing the ENTER button will add the
point onto the TL on the right, at this moment the task point options for the newly added waypoint
will appear in the DO area, allowing to set several aspects of the task point (these can also be edited
later).
5.1.2
Insert New Waypoint
This menu allows the user to add a new waypoint to the waypoint list. The co-ordinates and altitude
used for the waypoint are based on the current position.
5.1.3
Edit Waypoint
Entering this menu allows any of the characters of the selected waypoint to be changed. The name
of the waypoint can be changed, along with the elevation, lattitude, longitude and if the waypoint is
to be designated as a landing field. To change any of the properties of the waypoint, first select the
waypoint to changed. Pressing S2 pulls up the menu allowing the waypoint to be edited. Pressing
the S2 button again will show a cursor as shown in Figure
5.2
, indicating the character to edited.
26
Содержание NAV
Страница 1: ...User manual Document version 3 4...
Страница 25: ...24...
Страница 37: ...Figure 8 2 Critical Airspace Data 36...
Страница 61: ...Figure 14 1 Firmware Update 60...