Table 5.3– continued from previous page
Type
Navigation
Start out or Start in
The time at which the start opens. The start is only validated
when the pilot crosses the perimeter line at a time later than the
defined time. The TTG (time to go) will show how much time
remains to the opening of the start, i.e the difference between this
field’s value and the local time of day. Navigation to next point
will only continue after the validation of the start.
Goal
Cylinder
or
Goal Line
Time of goal close. The
Goal Close
configurable data field displays
how much time is left until the close of the goal.
End Speed Section
This waypoint type defines the end of the speed section in the
task
Landing
Time of compulsory landing. The time will be used to calculate
the
Land In
user defined field.
5.2.2
Move Route Point
The order of a task point can be easily changed. To change the order simply select the waypoint
using the UP, and DOWN buttons. Push the ENTER button to activate the actions menu list.
Then select the
Move Route Point
option, and push ENTER button. A cursor will be shown next
to the selected waypoint. Using the UP and DOWN buttons move the task point to the desired
position and push ENTER.
1
5.2.3
Remove Route Point
To remove a task point select it using UP, and DOWN buttons, and then pushing the ENTER
button to activate the Task Point Menu, chose the
Remove Route Point
option and push ENTER
to remove it from the list.
5.2.4
Delete Task
Delete route will delete the entire route. On any waypoint push the ENTER button to activate the
actions menu list. Select the
Delete Route
option from the menu, and push the ENTER button to
confirm. The route will be deleted and the WL area activated.
5.2.5
View Task
Entering the task view menu shows the task along with the optimised route as shown in Figure
5.3
.
This view has a number of important features displayed. The start time is shown in TP1 and the
optimised route is shown by following the sequential waypoints. The size of the cylinders is also
shown along with a scale at the bottom left of the screen. The total optimised distance for the task
is show at the top of the screen. Since this is optimised distance it will be less than the distance
shown in the
Task List
.
30
Содержание NAV
Страница 1: ...User manual Document version 3 4...
Страница 25: ...24...
Страница 37: ...Figure 8 2 Critical Airspace Data 36...
Страница 61: ...Figure 14 1 Firmware Update 60...