Figure 5.2: Edit Waypoint
The waypoint may also be configured as a
Landing
, these waypoint will then be displayed in the
Nearby Landings
.
5.1.4
Delete Waypoint
It is possible to delete just a single waypoint on the NAV . Select the waypoint to be deleted by
pressing either the S3 or S4 buttons. Once the waypoint is highlighted, selecting
Delete Waypoint
will remove the waypoint from the NAV memory. If a waypoint is in use int the Task the delete
function will be disabled, to delete the Waypoint it must firstly be removed from the Task.
5.1.5
Delete All Waypoints
All of the waypoints can be removed from the NAV . Delete all the waypoints will also delete
the Task. When selecting this option the NAV will prompt to ensure that this is exactly what is
intended. WARNING: Do not confuse this function will
Delete Task
, the last think you want is to
be sitting on takeoff with no waypoints in the NAV , to clear the previous task use the
Delete Task
function described in section Section
5.2.4
.
5.1.6
Go To Point
Selecting the
Go To Point
will force navigation to the selected waypoint. Once selected (by pressing
the ENTER button), the instrument will jump to the
flight screen
automatically navigate to that
point. When returning to the Waypoints/Task will cancel the active
Go To
.
The
Go To
function will override the task navigation, although the NAV will remember where
it was in the task, so when the
Go To
is canceled (as described above) it will resume the task at
the point it was at before the
Go To
was activated.
5.2
Edit Task
The NAV will only store one route. This is deliberate to prevent flying an incorrect task.
A task can be edited by selecting the
Edit Task
option of the
Waypoint Action Menu
. Selecting
the
Edit Task
option will highlight the first Task/Route point in the TL area. Pushing the UP
27
Содержание NAV
Страница 1: ...User manual Document version 3 4...
Страница 25: ...24...
Страница 37: ...Figure 8 2 Critical Airspace Data 36...
Страница 61: ...Figure 14 1 Firmware Update 60...