Fluke BP Pump 2 Operators, Руководство оператора

Страница: 58 / 82

BP Pump 2
Operators Manual
3-22
Editing Auto Sequences
Use the following steps to edit an auto sequence:
1. Press the
AUTO SEQUENCE
soft key to access the
Auto Sequence
menu.
A u to Se qu ence
EDIT PRI N T RU N
fas36.eps
2. Press the
EDIT
soft key.
3. At the
Select Auto Sequence
prompt, press a numeric key (
1-9
), followed
by the
ENT
key. You are prompted to select, enable, or disable each of the
components listed below. Press the
ENT
key at each of the prompts to
advance to the next selection.
•
Print Auto Sequence Result
•
Pressure Gauge Test
•
Pressure Source Test
•
Pressure Leak Test
•
Pressure Relief Valve Test
•
Cuff Selection
•
NIBP Simulations (1-5)
Note
By default, each auto sequence is configured to perform the Leak Test,
Relief Test, and BP Simulation #1 (120/80) Changing the cuff selection
changes the available BP Simulation options.
4. When finished, either press the
RUN
soft key to run the sequence or press
HOME
to return to the
Main
menu.