Fluke BP Pump 2 Operators, Руководство оператора

Страница: 29 / 82

Setup, Maintenance, and Support
Setting up the Tester
2
2-5
User-Defined Simulations
The Tester supports up to nine user-definable blood pressure simulations
configured through the
Setup
menu.
To access and modify a user-defined simulation definition, take the following
actions:
1. Use the soft keys to follow this menu path:
SETUP
C
USER DEF SIMULATION
C
Number Key (1-9)
C
ENT
2. Alternatively, you can access the definition from the number keys:
0 USER DEFINED key
C
OPTIONS (to scroll through the
numbers)
C
EDIT
With either method, the
User Defined Simulation
screen appears:
User Defined Sim u lation 1
Sys: 120 Dia: 8 0 P u lse: 0.70cc HR: 75
<- FIELD FIELD ->
fas23.eps
This screen shows the number of the simulation, along with the following
parameters available for configuration. Their valid ranges are as follows:
•
Sys
: Systolic, 20 – 250 mmHg
•
Dia
: Diastolic, 10 – 200 mmHg
•
Pulse
: Pulse Volume, 0.1 cc – 2.4 cc in increments of 0.1 cc
•
HR
: Heart Rate, 30 – 250 bpm
The systolic and diastolic settings are interdependent. The diastolic must
always be below the systolic. The pulse volume and the heart rate are also
interdependent. The maximum pulse volume cannot be achieved at the
maximum heart rate.
3. Press the soft key
<- FIELD
or
FIELD ->
to scroll through options,
making changes to each field by entering numbers from the number keys.
4. Pres
ENT
to return to the
SETUP
menu.
5. If desired, press the
HOME
button to return to the
Main
menu.