Fluke 2635A, Руководство пользователя

Страница: 178 / 268

2635A
Users Manual
5-8
Printing the Review Array
Perform the procedure in Figure 5-4 to print the Review array, which consists of the last,
maximum, and minimum measurement values during the last scan, and previous scans if
the instrument configuration has not changed or the review array cleared. If the Review
array is blank (cleared), an error message is displayed with an audible "beep." If this
occurs, press
C
to exit the menu.
LIST
ENTER
dir
LASt
LISt
Typical
Required
Printing the Review Array. Press the LIST key
to open the List menu. Select LASt (Last) to print
out the Review array, which consists of the last,
maximum, and minimum values from the most
recent scan if the instrument configuration has
not changed and the Review array has not been
cleared. Press ENTER key to print the
measurements (see example below). An
ERROR message appears if the Review array is
cleared (empty).
Date (Month/Day/Year)
of Last Recorded Scan
Channels
Time (Hours:Minutes:Seconds)
of Last Recorded Scan
Last Values
Error
CANCL
16:51:47 07/21/94
CH LAST VALUE MAX VALUE MIN VALUE
0: 399.74 HZ 415.63 HZ 392.22 HZ
7: -013.91 VDC -013.88 VDC -013.95 VDC
12: 103.38 mVAC 103.38 mVAC 103.35 mVAC
14: 001.07 MX+B 004.74 MX+B 001.01 MX+B
15: 2.2451 kOHMS 2.2666 kOHMS 2.2395 kOHMS
20: 072.34 F 076.21 F 071.29 F
Maximum Values Minimum Values
op57f.eps
Figure 5-4. Printing the Review Array