Fluke Calibration RUSKA 7615, Руководство пользователя

Страница: 58 / 64

RUSKA 7615
Users Manual
7-2
W
Caution
Wood or metal boxes do not absorb shock when dropped and;
therefore, are not recommended.
If the original packaging and shipping materials have been retained, use them for packing
the Calibrator. If the Calibrator is being packed for long-term storage (more than 30 days),
place a desiccant bag inside the box. In general, prepare the Calibrator for shipment as
follows:
1.
Fluke Calibration has an RMA procedure in place. Please contact the Customer
Service Center to obtain an RMA number prior to returning any equipment to Fluke.
Have the following information available when contacting Fluke:
•
the part number,
•
the serial number,
•
the purchase order number,
•
the billing and ship to address, and
•
the buyer's name and telephone number.
This information plus the RMA number must be attached to the unit when it is
shipped to Fluke Calibration. There will be a minimal charge for inspection and/or
evaluation of returned goods.
2. Enclose the Calibrator in plastic or any good water barrier material. Anti-static
material is advisable.
3. Interior Carton (size 31 x 22 x 19 inches): Cover bottom and sides with no less than
3" of polyfoam. Use four strips 4" to 6" wide and 50" to 60" long. Arrange strips to
cross each other inside carton. Cover sides and top, completely filling entire carton.
Tape carton closed.
4. The Exterior Crate 34 x 27 x 29 on pallet made of wood. Use four 3 x 3 x 84 inch
strips of polyfoam crossing each other inside the carton. Place interior carton inside
making sure exterior carton is completely filled. Do not close the carton yet.
5. Inside the exterior carton, include the following:
a.
Statement of the problem or service needed. Be specific. Include the name and
telephone number of a knowledgeable technician for consultation.
b. The part number, serial number, return address, and purchase order number.
c. Seal the carton, using gummed tape.
6. Address the carton to:
FLUKE CALIBRATION
10311 WESTPARK DRIVE
HOUSTON, TX 77042
7. Labels recommended are THIS SIDE UP, HANDLE WITH CARE, DO NOT
DROP, and FRAGILE .
Shipping Instructions
Fluke recommends the use of air freight for transportation. Surface transportation
subjects the shipment to more frequent handling and much more intense shock.
Again, it is essential that the procedures mentioned in this Chapter be strictly adhered to
in order to prevent damage to the instrument.