Fluke Calibration RUSKA 7615, Руководство пользователя

Страница: 14 / 64

RUSKA 7615
Users Manual
1-4
Friendly Display
The Calibrator’s vacuum fluorescent display combines a bright, low-glare readout with a
wide viewing angle. During normal operation, the measured pressure is easily visible
from a distance of 10 feet (3 meters).
Adjustable Pressure Display
The pressure display can be adjusted to show one decimal greater than or less than the
default resolution.
Ease of Operation
An intuitive, menu-driven interface makes the Calibrator easy to use. Frequently used
selections such as the units of measure are restored to memory each time the Calibrator
powers up.
Easily Programmable
The Calibrator’s powerful microprocessor provides the basis for smart electronics. With a
few simple keystrokes, the user can set limits on the system pressure, create unique units
of measure, program a test sequence, and more.
Attractive Desktop Packaging
A sturdy aluminum case houses all of the Calibrator’s hydraulic, pneumatics, electronics,
and user controls.
Power-On Self Test (POST)
Upon power-up, the Calibrator quickly tests its hardware and software. After the
Calibrator completes this test, the user can select more extensive self-tests for the
hydraulic and electronics.
Ease of Calibration
A menu drive calibration procedure can be performed either remotely or entirely from the
front panel. No disassembly is required, and there are no potentiometers to tune.
Automatic Zero Adjust
At the user’s request, the Calibrator’s software automatically performs the zero
adjustment, with no potentiometers to tune.
Automatic Head Correction
The Calibrator automatically corrects for head pressure, between the Calibrator and the
DUT (Device Under Test) taking into account the density of the test fluid.
Choice of Medium
The hydraulic Calibrator can be used with various non-corrosive fluids as pressure media.
Choice of display units
Standard units include inches of mercury at 0°C and 60°C, kiloPascals, bars, pounds
per square inch, inches of water at 4°C, 20°C, and 25°C, kilograms per square centimeter,
millimeters of mercury, centimeters of mercury at 0°C, and centimeters of water at 4°C.
Altitude and airspeed units include feet, meters, knots, and kilometers/hour. In addition to
these predefined units, four user-defined units are programmable.
Communications Interface
RS-232 serial interface and IEEE-488 interfaces are standard. The user’s computer
communicates with the Calibrator through the Standard Commands for Programmable
Instruments (SCPI) protocol. The Calibrator can also be configured to accept existing
software written for the RUSKA Series 6000 DPG.