Fluke Calibration RUSKA 7615, Руководство пользователя

Страница: 37 / 64

Local Operation
Programming Sequences
4
4-9
7. Repeat steps 5 and 6 until the test sequence is complete.
8. When all steps have been entered, press PREV to return to the Named programs
screen.
Automatically Generating a Program
In order for the Calibrator to automatically generate a program the user must input the
first set-point pressure, the last set-point pressure, and the number of steps in between, as
well as the dwell time, max time and tolerance common to all setpoints.
1.
Insure that the units, limits, and control parameters are their desired values.
2. The program is entered from the Program menu. From the Main Menu (press PREV
until the Main Menu appears) press Menu [F6] | Program [F4].
3. Use the arrow keys to highlight New. If these steps are used on an existing program,
all program steps will be deleted and replaced with the automatically generated
program.
4. Press Edit [F4]. Since new was highlighted the Calibrator will create a new program
and give a default name of NAMEnn where nn is a two digit number. The Program
Editing screen will appear, displaying the first step.
5. Press Auto [F3].
6. Using the numeric keypad enter the values for Start, Stop, Tolerance, Dwell time,
Max time, Points up, and Points down pressing ENTER after each value. The up and
down arrow keys may be used to skip fields.
7. Press Program [F1]. The program will be generated and the display will show the
first step.
8. Press PREV to return to the Named Programs screen.
Changing the Name of a Program
1. The name is changed from the Program menu. From the Main Menu (press PREV
until the Main Menu appears) press Menu [F6] | Program [F4].
2. Use the arrow keys to highlight the current name.
3. Press Edit [F4]. The program editing screen will appear, displaying the first step.
4. Press Name [F6].
5. Use the arrow keys to highlight a character from the character set.
6. Press Add [F3] to add the character to the scratchpad.
7. To correct a mistake press Clear [F4] and return to step 5.
8. Repeat steps 5 and 6 until the name is complete.
9. Press Enter [F5] to store the contents of the scratchpad as the new name of the
program.
10. Press PREV twice to return to the Named Programs screen.
Changing an Existing Program
Instructions for changing an existing sequence are given below. Both manually and
automatically generated programs may be edited.
1.
Programs are changed from the Program menu. From the Main Menu (press PREV
until the Main Menu appears) press Menu [F6] | Program [F4].
2. Use the arrow keys to highlight the name of the program.