Fluke Calibration RPM4, Руководство по эксплуатации и обслуживанию

Страница: 26 / 150

RPM4™ OPERATION AND MAINTENANCE MANUAL
Page 16
P R E S S U R E 1 U N I T M h z R R
D D I S P L A Y F U N C I O N n n / n n
DISPLAY FIELD NAME PURPOSE CONTENTS SECTION
1. PRESSURE1 Measured
pressure
Displays pressure
measured by the
active Q-RPT Numerical pressure value and sign.
Intermittently flashes
<SDS
CLOSED> when the Q-RPT is shut
off from the TEST(+) port by SDS.
1.2.2.1
3.2.7
2. UNIT Unit of
measure Identifies unit of
measure in which
pressure values are
displayed Pressure unit abbreviation 3.3.2
3. M Measurement
mode Identifies
measurement mode
of displayed pressure
<a> absolute
<g> gauge or negative gauge
<d> differential
3.3.3
4. h Head
pressure
indicator Indicates whether a
fluid head correction
is applied to
PRESSURE1 <h> the fluid head is not zero
<blank> fluid head is zero
3.3.7
5. z AutoZero
indicator Indicates whether
the AutoZero function
is ON or OFF for the
active
Q-RPT and
measurement mode
<z> AutoZ is ON
<blank> AutoZ is OFF
3.5.1
6. RR Active
Q-RPT
position
indicator Indicates the position
of the active Q-RPT
in the RPM4 <Hi> Hi Q-RPT
<Lo> Lo Q-RPT
<HL> Hi and Lo Q-RPTs together in
parallel measurement mode
<Hd> Hi and Lo Q-RPTs together in
differential measurement
mode
3.2.3
7. nn/nn Sequence
progress
indicator Indicates progress of
ATest sequence,
during test execution
<NN/NN> Number of this point
over total number of points
in the sequence
3.3.10
8. DISPLAY
FUNCTION
Information
specific to
the DISPLAY
mode Pressure indication
depending on current
RPM4 DISPLAY
function. Leading
character identifies
the value Numerical pressure value
and sign.
<PPC3 EXT DEV:> when the RPM4
is initialized as an external device
to a PPC3 pressure controller.
3.3.6
9. D Pressure
information
indicator Pressure information
indicator depending
on current RPM4
DISPLAY function.
<
σ
> Display mode is AVERAGE
and value is standard deviation
<R> Display mode is RATE and
value is pressure rate of
change per second
<H> Display mode is HI/LO and
value is high, then low
<D> Display mode is DEVIATION
and value is difference from
current target
<
S
, , > Display mode is RPT
and value is measurement
of inactive RPT
<F> Display mode is FREEZE and
value is last captured reading
Blank, no character Current
display mode is CLEAN
3.3.6
Figure 3. MAIN RUN Screen Display Fields