Fluke Calibration RPM4, Руководство по эксплуатации и обслуживанию

Страница: 77 / 150

3. OPERATION
Page 67
3.5.5.1 <1S
CR
S
VR
>
 PURPOSE
To adjust the idle time after which RPM4’s SCREEN SAVER activates.

PRINCIPLE
RPM4 has a SCREEN SAVER function which causes the display to dim after a
front panel key is NOT pressed for a certain amount of time. The default is for the
screen saver to activate after 10 idle minutes. The screen saver activation time
can be adjusted by the user or screen saving can be completely eliminated.
Setting screen saver time to zero eliminates the SCREEN SAVER function so
that the display permanently remains at full brightness.
 OPERATION
To access the SCREEN SAVER function, press [SPECIAL] , <5prefs> ,
<1ScrSav> . Edit, in minutes, the idle time after which screen saver will activate
to dim the screen. Set the time to zero to eliminate the SCREEN SAVER function.
3.5.5.2 <2SOUND>
 PURPOSE
To adjust or suppress the RPM4 valid key press sound.

PRINCIPLE
RPM4 provides audible feedback by a brief “beep” when a valid key press is
made. The tone frequency of this beep may be selected from three choices or it
may be completely suppressed. Invalid key presses are indicated by a
descending two tone “blurp” which cannot be suppressed.
 OPERATION
To access the keypad sound adjustment function press [SPECIAL] , <5prefs> ,
<2sound> .
Select between <2lo> , <3mid> or <4hi> to adjust the valid key press tone frequency.
Select <1none> to suppress the valid key press tone.
The sound function only affects the valid key press tone. The invalid key
press tone and other RPM4 sounds cannot be adjusted or suppressed.
3.5.5.3 <3TIME>
 PURPOSE
To view and edit the RPM4 internal time and date settings.

OPERATION
To access the TIME function
press
[SPECIAL] , <5prefs> , <3time> .
The display is:
Edit: 1time 2date
08:32:11 am 20030125