5.a.b.c
The triplet a.b.c uniquely identifies the individual physical hardware unit,
and cannot be changed.
The unit ID number is used to identify the physical hardware units within
the configurator interface that is used for configuration of the unit.
A simplified diagram demonstrating the relationship between a wired LAN,
and a linked mesh radio network containing a mesh end unit and mesh
point units, is shown in
Figure 5. Fluidmesh Network Addressing
Operating the unit in Mesh Point mode or Mesh End mode
If the Fluidmesh 4200 FIBER radio transceiver unit is installed as part of a
mesh network architecture, it can be set to operate in either of two
operating modes:
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 21 of 180
