Figure 5.8: Advanced wireless parameters configuration.
to comply with the Dynamic Frequency Selection (DFS) international reg-
ulations. Upon radar detection, two communicating Fluidmesh units agree
on the next radar-free channel to switch to, so that they can continue to
communicate on that channel. The DFS is automatically enabled in the fol-
lowing frequency ranges: 5.250 GHz – 5.350 GHz and 5.470 GHz – 5.725
GHz. The DFS management can be manually disabled. Outside the above
mandatory frequency bands, the DFS is not required and it is disabled by
default. Please note the DFS is required by law in many countries and by
disabling it you might incur fines and criminal charges by the local telecom-
munication authorities.
IN NO EVENT SHALL FLUIDMESH NETWORKS, INC. BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER
BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR
IN CONNECTION WITH IMPROPER USE OR OPERATION OF THE DFS
FUNCTIONALITIES.
Data Packet Encryption (Software Plug-in Required)
. Advanced En-
cryption Standard (AES) 128 bits encryption can be enabled at the link-level
31
