Username:
admin
Password:
admin
To preserve the security of your system, make sure you change the default
password once the entire installation is completed.
In case the log-in form does not appear, please refer to Section 6.
5.3
End-user License Agreement and Region of Op-
eration
The first time you log-in, you will be asked to accept the terms of the end-
user license agreement and select the country where you will be operating
the unit (Fig. 5.2 is an example for a FM2200 unit). You must accept the
terms of the license agreement in order to activate the device. If you do not
wish to accept the terms of the license agreement, please turn off the unit
and contact Fluidmesh Networks. Choosing a wrong country/regulatory do-
main setting may lead to an illegal wireless configuration.
Once the license is accepted the unit can be configured. Two configuration
methods are available as shown in Fig. 5.3(a): FMWizard
TM
and Classic.
The former consists of a simple four steps wizard to configure the basics
settings of the unit (see Section 5.4), whereas the latter is the classic Flu-
idmesh Web-based GUI for advanced configuration (see Section 5.5).
Figure 5.2: End-user license agreement.
24
