FLIR identiFINDER R300, Руководство пользователя

Страница: 64 / 304

2.6. Shutting Down the FLIR identiFINDER R300 FLIR Detection
2.6 Shutting Down the FLIR identiFINDER R300
Several methods are available to shut down the FLIR identiFINDER R300.
Ô
To shut down the FLIR identiFINDER R300 normally …
1. Press and hold
I
.
After a couple of seconds, the shut down screen will be displayed (Figure 57 , p. 64 ).
Figure 57.
Shutting down the FLIR identiFINDER R300
2. Press
L
to con irm the shut down command.
or
Keep
I
depressed and the FLIR identiFINDER R300 will shut down.
or
Press
R
to cancel the shut down and resume normal operation.
If you shut down the FLIR identiFINDER R300 while an alarm is raised (Figure 58 , p. 65 ), the
end time of the alarm entry is not stored in the database ( 5 , p. 97 ). Instead, the end time will
re lect that the instrument was shut down before the end of the alarm.
Ô
To shut down the FLIR identiFINDER R300 in case of software failure …
1. Press and hold
I
for about 20 seconds until the red LED and the beeper emit six short and
one long signal.
The FLIR identiFINDER R300 should shut down.
64 identiFINDER
®
R300/en/2014.4(13623)/Feb2015