FLIR Detection
List of Figures
67
Optimum posture for neutron detection
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
73
68
Finder mode: Initial background measurement
. . . . . . . . . . . . . . . . . . . . . . . .
74
69
Finder mode: Continuous measurement
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
74
70
Spectrum acquisition in Identi ication Mode
. . . . . . . . . . . . . . . . . . . . . . . . . .
75
71
Finding the position for best measurements
. . . . . . . . . . . . . . . . . . . . . . . . . .
76
72
Identi ication results
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76
73
Spectrum the identi ication is based upon
. . . . . . . . . . . . . . . . . . . . . . . . . . .
77
74
Valid IP address after a connection was established
. . . . . . . . . . . . . . . . . . . . .
78
75
The FLIR identiFINDER R300’s home page
. . . . . . . . . . . . . . . . . . . . . . . . . . .
78
76
Table of identi ication result records
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
Details of an identi ication result record
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
80
78
Identi ication results
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
81
79
Identi ication result summary for sending
. . . . . . . . . . . . . . . . . . . . . . . . . . .
82
80
Data transmission progress
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
82
81
Ready to search for Bluetooth devices
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
82
List of suitable Bluetooth devices detected
. . . . . . . . . . . . . . . . . . . . . . . . . . .
83
83
Pairing with a Bluetooth device
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
84
Shutting down the FLIR identiFINDER R300
. . . . . . . . . . . . . . . . . . . . . . . . . .
84
85
Cycling the manual modes Dose Rate, Finder, and Identi ication
. . . . . . . . . . . . . .
86
86
While Finder mode is disabled, cycling modes will toggle between Dose Rate and Iden-
ti ication modes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
86
87
Dose Rate mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
86
88
Detector overload
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
87
89
Finder mode: Initial background measurement
. . . . . . . . . . . . . . . . . . . . . . . .
89
90
Finder mode: Continuous measurement
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
89
91
Identi ication Mode: Progress display during time limited data acquisition
. . . . . . . .
90
92
Identi ication Mode: Count rate too low for best results
. . . . . . . . . . . . . . . . . . .
91
93
Identi ication Mode: Count rate too high for best results
. . . . . . . . . . . . . . . . . . .
91
94
Identi ication Mode: Progress display during count limited data acquisition
. . . . . . .
92
95
Identi ication Mode: Identi ication was not possible.
. . . . . . . . . . . . . . . . . . . . .
92
96
Identi ication Mode: Identi ied radionuclides
. . . . . . . . . . . . . . . . . . . . . . . . .
93
97
Countdown announcing the start of a scheduled measurement
. . . . . . . . . . . . . . .
94
98
Automated measurement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
94
99
Message during remote-controlled spectrum acquisition
. . . . . . . . . . . . . . . . . .
96
100 Dose rate display with alarm indication
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98
101 Alarm display: Dose rate warning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
102 Alarm display: Dose rate alarm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
11