FLIR Detection
2. Operating the FLIR identiFINDER R300
You increase the component with
+
and decrease it with
-
. In the example shown here, you
edit the year of the date since it is the selected component.
Now you need commands to select the other components of the value (see
2.2.1
, p.
35
). You can
reveal them with
Skip
mapped to
L
(Figure
24
, p.
41
).
Selected Entry Field
Selected Component
Next Component
Reveal More Commands
eveal More Commands
eveal More Commands
Figure 24.
Changing Combined Values: Selecting components.
Press
Left
or
Right
to select the component you want to edit.
To get the commands for editing back, press
Skip
until
+
or
-
reappear.
After you inished editing all components, press
Skip
until you see the
Accept
command, then
press
R
.
In case you change your mind, you can
Cancel
editing the value with
R
(Reveal the command
with
Skip
if necessary). The value in effect before you started editing with
Select
will be reestab-
lished.
Pressing
I
for a moment also cancels editing.
Do not press
I
for too long. That would power down your FLIR identiFINDER R300.
2.2.5
Changing Numerical Values
A lot of settings are numerical values, often with a immutable unit.
Several commands (Figure
12
, p.
35
) are available for editing numerical values. One of the number’s
digits is always selected (Figure
25
, p.
42
), that is, editing commands are applied to this digit. If you
start changing a number with
Select
(see
2.2.3
, p.
37
), the rightmost (least signi icant) digit is
selected.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
41
