FLIR DNR214, Инструкция по эксплуатации

Страница: 114 / 220

Using FLIR Cloud™ Client for PC or Mac 15
1. Live display : Double-click to expand the area. Right-click to access additional options.
Hold the mouse over the display area to access the camera toolbar.
Camera toolbar:
1.1. Streaming quality : Shows the bitrate and resolution for the stream, and shows
if display is showing the Sub Stream or Main Stream.
1.2. Manual recording : Click to start/stop manual recording.
1.3. Snapshot : Click to save a snapshot.
1.4. Mute/unmute : Click to mute/unmute audio (audio camera required).
1.5. Not supported.
1.6. Instant playback : Plays back the most recently recorded video from the cam-
era. By default, it will play back the last 5 minutes of recorded video from the
camera.
1.7. Digital zoom : Click to enable digital zoom mode. Click and drag over the dis-
play area to zoom on the camera. Then click and drag to pan. Click the icon
again to zoom out.
1.8. Disconnect.
1. Split-screen mode : Click to select split-screen layout.
2. Aspect ratio : Use the drop down menu to select the aspect ratio for the selected
camera. Original uses the actual aspect ratio of the image. Full-win stretches the im-
age to fill up the entire display area.
3. Full-screen : Click to open full-screen mode. Press ESC to exit full-screen mode.
4. Save view : Click to save the current display layout and open cameras as a view.
Then enter a name for the view.
5. Start/stop tour : Click to start the tour. During the tour the client will cycle through
all saved views every few seconds. Click again to stop the tour.
6. PTZ Controls : Controls for PTZ cameras (not included). See 15.3 Controlling PTZ
Cameras , page 106 for details.
#LX400094; r.43927/43955; en-US
104